haynes 214 alloy

haynes alloys, haynes alloys Suppliers and Manufacturers haynes 214 alloy

< Sponsored Listing ASTM B622 ASME SB622 Hastelloy NS3308 C22 N6022 2.4602 Hastelloy C22(Haynes) Nickel Alloy Seamless Pipe Standard : ASTM B622 Seamless Nickel and Nickel-Cobalt Alloy and Tube Steel Grade : NS3308 C22 N6022 2.4602 Hastelloy C22(Haynes) Size Range: OD: 6-219mm, Wall Thickness: 1.0-15mm Chemcial Composition(%): Unless specified in the table, WeldingHAYNES® 214® alloy is a precipitation-strengthened alloy. When the gamma prime phase (Ni 3 Al) precipitates, the alloy undergoes a slight volumetric contraction. It is possible that stress and strain caused by welding and mechanical deformation caused by the precipitation may cause cracking.WeldingHAYNES® 214® alloy is a precipitation-strengthened alloy. When the gamma prime phase (Ni 3 Al) precipitates, the alloy undergoes a slight volumetric contraction. It is possible that stress and strain caused by welding and mechanical deformation caused by the precipitation may cause cracking.

Principal Features

Haynes International, Inc. is pleased to announce the development of HAYNES® HR-224® alloy, a new alloy with excellent oxidation resistance and improved fabricability and weldability compared to HAYNES® 214® alloy.Principal Features - Haynes International, Inc.HAYNES® 214® alloy (UNS N07214) is a nickel - chromium-aluminum-iron alloy, designed to provide the optimum in high-temperature oxidation resistance for a wrought austenitic material, while at the same time allowing for conventional forming and joining.Oxidation ResistanceFor exposures of short duration, 25 alloy can be used at higher temperatures. Applications for which oxidation resistance is a serious consideration normally call for newer, more capable materials such as 230® alloy or HAYNES 188 alloy. This is particularly important at temperatures above 1800°F (980°C).

Nickel Alloy 214 / UNS N07214 Coils, Strips, Foils

Haynes® 214 Haynes Foils Exporter, Nickel Alloy 214 Haynes Foil, Haynes Shim Foil, Nickel Alloy Foil Supplier, Haynes UNS N07214 Foils Exporter, 214 Nickel Alloy Coils, Strip, Foils Stockist, 214 Haynes Shim Foils Exporter in Mumbai, India. Their forms are available in Coil -Sheet, Strip, Foil Wire -Profile, Round, Flat, Square. Nickel Alloy haynes 214 alloyKam Specialties Inc Aerospace Metal SupplierHaynes 188 Haynes 214 Haynes 230 / 230-W Haynes 242 Haynes 556 Haynes HR-120 Haynes HR-160 Hy Mu 80 (HyMu80) Invar 36 Invar 42 Invar 49 Jethete (M-152) Kovar L-605 (L605 or Haynes 25) Maraging 300 Monel 400 (Nickel 400) Monel 405 Monel K-500 (Alloy K500) Mu Metal N-155 (Multimet) Nickel 200 / Nickel 201 Nimonic 75 (Alloy 75) Nimonic 263 (C263 haynes 214 alloyHigh-temperature Alloys for Industrial ApplicationsHAYNES® 214® alloy IS giving good service in applications where clean firing is a "must". The alloy resists spalling and flaking at temperatures through 2200°F (1205°C). This quality is the result of a spall-resistant, Al 2 O 3 type film which forms on the metal surface after exposure to an oxidizing atmosphere.

High Performance Alloys - Fort Wayne Metals

We routinely draw the following high-performance alloys: 35N LT® (ASTM F562 · ISO 5832-6) MP35N® (ASTM F562 · ISO 5832-6) L605 (ASTM F90 · ISO 5832-5); FWM® 1058 (ASTM F1058 · ISO 5832-7) equivalent to Conichrome®, Phynox® and Elgiloy®; FWM® 1537 (ASTM F1537 · ISO 5832-12)Haynes InternationalWherever design decisions are made and high-performance alloys are in demand, Haynes International is there. Our plate stock includes HASTELLOY® and HAYNES® alloys in multiple sizes. To speak directly with a salesperson, please call us at 1-800-354-0806 Haynes 214 Alloy - Strip | Elgiloy Specialty MetalsHaynes ® Alloy 214 is a nickel-chromium-aluminum-iron alloy with excellent high temperature corrosion and oxidation resistance at and above 955°C (1750°F). H214 is best suited for high temperature, low stress environments. Haynes ® Alloy 214 is sold in the solution heat treated condition.

Haynes 214 - Alloy Wire International

Haynes 214 is a Nickel-Chromium-Aluminium-Iron alloy which is principally intended for use at temperatures of 955 o C (1750 o F) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant wrought alloys at these temperatures. Haynes 214 is also known as Cabot 214 and Hastelloy 214.HAYNES- 214- alloy Welding InformationHAYNES® alloy No. 214® is a nickel-base alloy with outstanding oxidation resistance to 2200°F. 214® alloy has also been shown to have excellent carburization, nitriding, and chlorination resistance. The alloy contains nominally 4.5 weight percent aluminum.HAYNES- 214- RTW- Filler Metal (Structural)HAYNES® 214® RTW filler metal is used for the gas metal arc and gas tungsten arc welding of HAYNES® 214® alloy. The deposited weld metal has outstanding oxidation resistance to 2300°F and excellent resistance to carburization and excellent resistance to chlorine-bearing environments.

HAYNES 214 alloy

HAYNES®214®alloy (UNS N07214) is a nickel - chromium-aluminum-iron alloy, designed to provide the optimum in high-temperature oxidation resistance for a wrought austenitic material, while at the same time allowing for conventional forming and joining.HAYNES 214 ALLOYHAYNES®214 alloy is a nickel - chromium-aluminum-iron alloy, designed to provide the optimum in high-temperature oxidation resistance for a wrought austenitic material, while at the same time allowing for conventional forming and joining.Greystone Alloys | Haynes ScrapHAYNES® HR-224TM A new alloy with excellent oxidation resistance and improved fabricability and weldability compared to HAYNES® 214® alloy. HAYNES® NS-163® HAYNES® NS-163® alloy is a wrought cobalt-based alloy for use in sheet and wire forms. HAYNES® 188

Creep and Rupture Properties - Haynes International, Inc.

800.354.0806 765.456.6012. The Home of HASTELLOY® and HAYNES® Alloys Our Company. Company Overview; Locations and DirectionsCorrosion-resistant alloys - Haynes International, Inc.High-temperature Alloys. HAYNES® 25 alloy; HAYNES® 75 alloy ; HAYNES® 188 alloy; HAYNES® 214® alloy; HAYNES® 230® alloy; HAYNES® 233 alloy ; HAYNES® 242® alloy; HAYNES® 244® alloy; HAYNES® 263 alloy; HAYNES® 282® alloy; HAYNES® 556® alloy; HAYNES® 617 alloy; HAYNES® 625 alloy; HAYNES® 625SQ® alloy; HAYNES® 718 alloy haynes 214 alloyCarburization ResistanceHAYNES® 214® alloy has very good resistance to carburization, as measured in both packed graphite exposure tests and mixed gas exposure tests. Results for these tests are presented in the following pages. All results are presented in terms of the mass of carbon absorption per unit area, haynes 214 alloy

A METAL SOURCE, LLC | Haynes AlloysHAYNES ® ALLOYS haynes 214 alloy

HAYNES ® ALLOYS DISTRIBUTOR IN THE USA A METAL SOURCE, LLC a distributor of various Haynes ® Alloy Grades and Conditions in any size or form. Mill Quantity Minimums & Mill Leadtime may apply depending on Haynes ® Alloy Grade and Size. Check availability with our sales department by submitting your inquiry below to see if A METAL SOURCE, LLC can provide your Haynes ® Alloy haynes 214, haynes 214 Suppliers and Manufacturers at haynes 214 alloy240 haynes 214 products are offered for sale by suppliers on Alibaba haynes 214 alloy, of which nickel accounts for 1%. A wide variety of haynes 214 options are available to you, such as not powder. You can also choose from nickel bar haynes 214 There are 2 suppliers who sells haynes 214 on Haynes® 214 (Alloy 214), UNS N07214 - ulbrich haynes 214 alloyHaynes® 214 Alloy Description Alloy 214 is a nickel-chromium-aluminum-iron alloy designed to provide the optimum in high-temperatures oxidation resistance.This alloy which is principally intended for use at temperatures of 955oC (1750oF) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant haynes 214 alloy

Haynes® 214 (Alloy 214), UNS N07214 - ulbrich haynes 214 alloy

Haynes® 214 Alloy Description Alloy 214 is a nickel-chromium-aluminum-iron alloy designed to provide the optimum in high-temperatures oxidation resistance.This alloy which is principally intended for use at temperatures of 955oC (1750oF) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant haynes 214 alloyHaynes® 214 (Alloy 214) Wire UNS N07214 | UlbrichHaynes® 214 Alloy Description. Alloy 214 is a nickel-chromium-aluminum-iron alloy designed to provide the optimum in high-temperatures oxidation resistance. This alloy which is principally intended for use at temperatures of 955oC (1750oF) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant haynes 214 alloyHaynes 214-High Temperature Oxidation Resistant AlloyAbout Haynes 214. Super alloy Haynes 214 is a member of nickel based alloys family and is made for use at the applications temperatures up to 955oC or 1751oF. It offers great resistance to oxidation even superior than many heat resistant wrought alloys.

Haynes 214 (UNS N07214) - super-metals haynes 214 alloy

Haynes 214 alloy offers high resistance to carburization as in packed graphite exposure analysis and combined exposure tests. The carbon absorption evaluated for Haynes 214 alloy after 500 hours in packed graphite at 1800oF is very nominal. While excellent corrosion resistance is received by Haynes alloy, other alloys are analyzed significantly haynes 214 alloyHaynes 214 - Alloy Wire InternationalHaynes 214 is a Nickel-Chromium-Aluminium-Iron alloy which is principally intended for use at temperatures of 955 o C (1750 o F) and above. It exhibits resistance to oxidation that far exceeds virtually all conventional heat resistant wrought alloys at these temperatures.HAYNES® 214 - The Welding Warehouse, Inc.HAYNES® 214 HAYNES® 214 is a nickel-chromium-aluminum-iron alloy, designed to provide the optimum in high-temperature oxidation resistance for a wrought austenitic material, while at the same time allowing for conventional forming and joining. Intended principally for use at temperatures of 1750°F (955°C) and above, alloy 214 exhibits resistance to oxidation that far exceeds virtually all haynes 214 alloy

HAYNES® 214® Alloy - Stock or Indent - SPECIALTY METALS

HAYNES® 214® alloy (UNS N07214) is a nickel - chromium-aluminum-iron alloy, designed to provide the optimum in high-temperature oxidation resistance for a wrought austenitic material, while at the same time allowing for conventional forming and joining. Intended principally for use at temperatures of 1750°F (955°C) and above, 214® alloy haynes 214 alloyHAYNES 214 - alloywire haynes 214 alloyresistant alloys at temperatures of 955 °C (1750 °F) and above **High temperature static applications HAYNES 214 available in:-n Round wire n Bars or lengths n Flat wire n Shaped wire n Rope/Strand Packaging n Coils n Spools n Bars or lengths key advantages to you, our customer HAYNES 214 Technical Datasheet AWS 061 Rev.1 IMPORTANTHAYNES 214 - alloywire haynes 214 alloyresistant alloys at temperatures of 955 °C (1750 °F) and above **High temperature static applications HAYNES 214 available in:-n Round wire n Bars or lengths n Flat wire n Shaped wire n Rope/Strand Packaging n Coils n Spools n Bars or lengths key advantages to you, our customer HAYNES 214 Technical Datasheet AWS 061 Rev.1 IMPORTANT

HAYNES 214 (2.4646, UNS N07214) Zormetal

The Haynes 214 alloy (UNS N07214) is designed to provide high temperature oxidation resistance. Haynes 214 is also a nickel-chrome-aluminum-iron alloy that allows conventional forming and joining. Designed primarily for use at temperatures of 1750 ° F (955 ° C) and above, Haynes 214 has oxidation resistance that exceeds almost all haynes 214 alloyHAYNES 214 alloy - INKOSASHAYNES 214 alloy is available in the form of plate, sheet, strip, billet, bar, and wire. Applicable Specifications HAYNES 214 alloy is covered by DIN specification number 17744 No.2.4646 for all forms, and a full range of Haynes internal product specifications. Please consult Haynes International for details. Applications HAYNES 214 alloy haynes 214 alloyHAYNES 214 alloy - INKOSASHAYNES 214 alloy is available in the form of plate, sheet, strip, billet, bar, and wire. Applicable Specifications HAYNES 214 alloy is covered by DIN specification number 17744 No.2.4646 for all forms, and a full range of Haynes internal product specifications. Please consult Haynes International for details. Applications HAYNES 214 alloy haynes 214 alloy

Haynes® Alloy 214 - Wire | Elgiloy Specialty Metals

Haynes® Alloy 214 is a nickel-chromium-aluminum-iron alloy with excellent high temperature corrosion and oxidation resistance at and above 955°C (1750°F). Haynes® Alloy 214 is sold in the solution heat treated condition and is best suited for high temperature, low stress environments.Haynes 214 (UNS N07214) - super-metals haynes 214 alloyHaynes 214 alloy offers high resistance to carburization as in packed graphite exposure analysis and combined exposure tests. The carbon absorption evaluated for Haynes 214 alloy after 500 hours in packed graphite at 1800oF is very nominal. While excellent corrosion resistance is received by Haynes alloy, other alloys are analyzed significantly haynes 214 alloy

Have a question or need a custom quote?

Please contact us leebbnsteel@outlook.com